解锁文档
  • 指南
  • 指南
2024-11-19
目录

个人使用

个人使用者，请仔细阅读以下使用指南，根据自己的实际情况进行配置。

可以在服务页面，修改解锁地区和IP 生效时间30S

以下示例解锁DNS为4.4.4.4，实际使用以系统显示的对应地区DNS为准

由于DNS解锁的特殊性，比较推荐的落地搭建方式为X-UI或其他V2ray，Xray一键脚本。

# 非V2ray相关协议简单方法-直接修改VPS的系统DNS

  • SS SSR Trojan等

由于这些协议本身无法进行DNS分流，请使用如下命令配置DNS：

  • Debian/centos系统
  echo -e "nameserver 4.4.4.4（以实际为准）" > /etc/resolv.conf
       
  chattr +i /etc/resolv.conf

第一行命令是将解锁DNS添加为系统DNS

第二行命令是将DNS文件属性修改为只读(避免被系统复写修改）

  • 移除操作
   chattr -i /etc/resolv.conf
   echo -e "nameserver 8.8.8.8" > /etc/resolv.conf
  • ubuntu系统
修改DNS
vi /etc/systemd/resolved.conf
输入
DNS=4.4.4.4（以实际为准）

:wq保存后

systemctl daemon-reload
systemctl restart systemd-resolved.service
mv /etc/resolv.conf /etc/resolv.conf.bak
ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
  • 移除操作
修改DNS
vi /etc/systemd/resolved.conf
输入
DNS=8.8.8.8
DNS=1.1.1.1

:wq保存后

systemctl daemon-reload
systemctl restart systemd-resolved.service
mv /etc/resolv.conf /etc/resolv.conf.bak
ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf
  • 注意 部分香港CMI屏蔽了UDP 53的查询，我的落地已经开启了TCP53.请在/etc/resolv.conf文件中第一行添加
options use-vc
  • Shadowsocks-libev 版本
打开配置文件 默认 /etc/shadowsocks-libev/config.json
修改"nameserver":"4.4.4.4（以实际为准）"
  • SS docker 版本

添加参数 -d "4.4.4.4（以实际为准）"

# 非V2ray相关协议复杂方法-VPS安装dnsmasq实现DNS解锁分流

需要有一定使用基础，此处以debian系统为例

一.安装dnsmasq

apt-get -y install dnsmasq

二.配置dnsmasq

1.配置文件/etc/dnsmasq.conf

vi /etc/dnsmasq.conf

server=/netflix.com/tcp/4.4.4.4
server=/disneyplus.com/tcp/4.4.4.4
...
...
resolv-file=/etc/resolv.dnsmasq.conf

具体需要添加的域名请在TG群发送“域名规则”获取。4.4.4.4以实际DNS为准。

2.配置文件/etc/resolv.dnsmasq.conf

vi /etc/resolv.dnsmasq.conf

nameserver 1.1.1.1
nameserver 8.8.8.8

3.设置VPS系统DNS，将本机dnsmasq作为系统DNS服务器。参考上面的操作

 chattr -i /etc/resolv.conf
 echo -e "nameserver 127.0.0.1" > /etc/resolv.conf
 chattr +i /etc/resolv.conf

4.重启dnsmasq

/etc/init.d/dnsmasq restart

四.卸载

apt-get remove dnsmasq
chattr -i /etc/resolv.conf
chmod 777 /etc/resolv.conf
echo -e "nameserver 8.8.8.8" > /etc/resolv.conf

# V2ray相关协议，DNS分流

标准配置文件修改要素：

1.开启流量识别

  "sniffing": {
        "enabled": true,
        "destOverride": [
          "http",
          "tls"
        ]
      }

2.修改出口流量域名分类方式((如果机器带V6但是访问异常可以将“UseIP”改为“UseIPv4”)

  "outbounds": [
    {
      "protocol": "freedom",
      "settings": {
        "domainStrategy":"UseIP"
      }
    }
  ]

3.添加DNS分流

   "dns": {
    "servers": [
      "1.1.1.1","8.8.8.8", 
      {
        "address": "4.4.4.4（以实际为准）", 
        "port": 53,
        "domains": [
           "geosite:netflix"
        ]
      }
    ]
  }

一般默认配置文件地址

V2ray

/usr/local/etc/v2ray/config.json

修改完成后重启 systemctl restart v2ray

Xray

/usr/local/etc/xray/config.json

修改完成后重启 systemctl restart xray

完整配置文件示例（wulabing-Xray脚本）：(如果机器带V6但是访问异常可以将“UseIP”改为“UseIPv4”)

{
 "log": {
   "access": "/var/log/xray/access.log",
   "error": "/var/log/xray/error.log",
   "loglevel": "warning"
 },
 "inbounds": [
   {
     "port": 443,
     "protocol": "vless",
     "settings": {
       "clients": [
         {
           "id": "123456-789-123456-45678-12345678",
           "flow": "xtls-rprx-direct"
         }
       ],
       "decryption": "none",
       "fallbacks": [
         {
           "dest": 60000,
           "alpn": "",
           "xver": 1
         },
         {
           "dest": 60001,
           "alpn": "h2",
           "xver": 1
         }
       ]
     },
     "streamSettings": {
       "network": "tcp",
       "security": "xtls",
       "xtlsSettings": {
         "minVersion": "1.2",
         "certificates": [
           {
             "certificateFile": "/usr/local/etc/xray/self_signed_cert.pem",
             "keyFile": "/usr/local/etc/xray/self_signed_key.pem"
           },
           {
             "certificateFile": "/ssl/xray.crt",
             "keyFile": "/ssl/xray.key"
           }
         ]
       }
     },
     "sniffing": {
       "enabled": true,
       "destOverride": [
         "http",
         "tls"
       ]
     }
   }
 ],
 "outbounds": [
   {
     "protocol": "freedom",
     "settings": {
       "domainStrategy": "UseIP"  
     }
   }
 ],
 "dns": {
   "servers": [
     "1.1.1.1","8.8.8.8", 
     {
       "address": "4.4.4.4", 
       "port": 53,
       "domains": [
          "geosite:netflix" ,"geosite:disney"
       ]
     }
   ]
 }
}

# 其他脚本示例

# x-ui

bash <(curl -Ls https://raw.githubusercontent.com/vaxilu/x-ui/master/install.sh)

进入【面板设置】——【Xray相关设置】替换文件

{
  "api": {
    "services": [
      "HandlerService",
      "LoggerService",
      "StatsService"
    ],
    "tag": "api"
  },
  "inbounds": [
    {
      "listen": "127.0.0.1",
      "port": 62789,
      "protocol": "dokodemo-door",
      "settings": {
        "address": "127.0.0.1"
      },
      "tag": "api"
    }
  ],
  "outbounds": [
    {
      "protocol": "freedom",
      "settings": {"domainStrategy": "UseIP"}
    },
    {
      "protocol": "blackhole",
      "settings": {},
      "tag": "blocked"
    }
  ],
  "policy": {
    "system": {
      "statsInboundDownlink": true,
      "statsInboundUplink": true
    }
  },
  "routing": {
    "rules": [
      {
        "inboundTag": [
          "api"
        ],
        "outboundTag": "api",
        "type": "field"
      },
      {
        "ip": [
          "geoip:private"
        ],
        "outboundTag": "blocked",
        "type": "field"
      },
      {
        "outboundTag": "blocked",
        "protocol": [
          "bittorrent"
        ],
        "type": "field"
      }
    ]
  },    "dns": {
    "servers": [
      "1.1.1.1","8.8.8.8", 
      {
        "address": "4.4.4.4（以实际为准）", 
        "port": 53,
        "domains": [
           "geosite:netflix"
        ]
      }
    ]
  },
  "stats": {}
}

# mack-a 八合一脚本

wget -P /root -N --no-check-certificate "https://raw.githubusercontent.com/mack-a/v2ray-agent/master/install.sh" && chmod 700 /root/install.sh && /root/install.sh

运行脚本，选择【分流工具】 ——> 选【DNS分流】 ——> 选【添加】 ——> 输入给你的DNS【4.4.4.4】 ——> 默认输入【1】

返回官网https://nfdns.top/ (opens new window)

编辑 (opens new window)
上次更新: 2023/07/31, 11:03:11
关于本站
团队使用

← 团队使用→

Theme by Vdoing